Not quite as thick as the original Philips part but stays in the CRT frame perfectly. Original Philips part is 0.5mm thick, this filter is 0.28mm thick
There is a very slight difference in size between eg PM3260 and PM3214 sizes. You can easily trim to fit or state which oscilloscope when ordering.
If the filter mounting clips are broken I can supply this filter oversize to fit the CRT face, the frame will hold it in place. Note only the filter is supplied, not the CRT frame!
 |
Shows filter in frame for PM3214
through PM3244 and PM3267 |
 |
Shows filter in frame for
PM3260/65 |